久久精品A亚洲国产V高清不卡,真人性囗交69视频,护士扒下内裤让我爽一夜,А√天堂资源在线

Welcome to Tianjin Guoce Aerospace Technology Co., Ltd!

Tianjin GuoCe Aerospace Technology Co., Ltd.

Inspection Industry Solution Provider

We are more professional.

Testequipment

Telephone:18322499311

Mobile phone:18920407795

Fax:022-22145487

E-mail:10533646999@qq.com

Address:Chagugang Town, Wuqing District, Tianjin

Walk in composite salt spray laboratory

  • Hot Line:18322499311

  

  

1、 Main functions of the device:


The walk-in composite salt spray test room is designed to test the corrosion resistance of products made from various materials after surface corrosion treatments such as electroplating, anodizing, spraying, and rust prevention oil.

Performance indicators and system composition of the walk-in Composite salt spray testing machine


Model GC-YW-10000


Volume and size


The nominal content area is about 10m³


The effective size of the inner box is 2500 × 2000 × 2000mm (D length × W width × H height), including the height of the sloping top


The external space is approximately 2800 × 3000 × 2700mm (D length × W width × H height), including the height of the sloping roof


Weight approximately 1700 kg


The bottom load-bearing base plate of the machine is reinforced, and the working chamber can bear a load of 1 ton,


A 1mm thick anti slip and corrosion-resistant hard plastic silicone is laid at the bottom of the laboratory, which is resistant to High temperatures


Drainage holes are installed on the bottom plate of the laboratory


The working noise is ≤ 70db, measured at a distance of 1.2 meters from the ground and 1 meter in front of the machine


Maximum power 20KW


Maximum current 30A


Power supply conditions


Power supply AC 380V three-phase four wire+protective grounding; The allowable voltage fluctuation range is ± 10% V;


The allowable frequency fluctuation range is 50 ± 0.5HZ; TN-S power supply or TT power supply


The grounding resistance of the protective grounding wire is less than 4 Ω


Require users to configure corresponding capacity air or power switches for the equipment at the installation site, and this switch must independently control the use of the equipment

 


2、 Performance indicators


Environmental conditions for use: 1. The ambient temperature is 5-30 ℃ and the relative humidity is ≤ 85% R.H;


2. The installation site must be a flat and vibration free ground;


3. The equipment should be kept away from heat sources and flammable and explosive substances;


4. The installation location should not be directly exposed to sunlight and maintain indoor air circulation;


5. The equipment installation site needs to be clean and cannot be installed in dusty areas or dust outlets


Temperature and humidity range laboratory temperature range: 10℃~70℃


Saturation bucket temperature range: 20℃~70℃


Relative humidity ≥ 95% R. H2O% RH~98% RH (adjustable)

 


3、 Main technical parameters

       

Temperature resolution: 0.1 ℃


Temperature deviation: ±1℃


Temperature uniformity: ≤ 2 ℃ (under no-load conditions)


Temperature fluctuation: ± 0.5 ℃


Spray volume (m1/80cm2/h) 1.0~2.0 (collect at least 16 hours and take the average value)


Spray pressure: 1.00 ± 0.01kgf/cm2


PH value: neutral 6.5~7.2 acidic 3.0~3.3


Spray, static time: 1min~9999H fixed value operation can be set arbitrarily, and the program running time can be set to cycle operation.

 


Test meets and product execution standards

1. GB-T6461-2002 Grade evaluation of metal or other inorganic coatings on metal substrates after corrosion

       

2.ASTM. B117-2009 Salt Spray Test


3. JIS H8502 Salt water spray test method


4. IEC 60068-2-11:1981 Salt Spray Test


5. GB/T10125-2012 Salt Spray Test Method


6. GB T-6461-2002 Salt Spray Test Evaluation Criteria


7. ISO 9227-2006 Salt water spray test method


8. GB-T5170.8-2008 Inspection methods for Environmental testing equipment for electrical and electronic products - Salt spray testing equipment


9. GB-T5170.11-2008 Inspection Method for Corrosive Gas Testing Equipment


10. GBB150.11A-2009 Military Equipment Laboratory Environmental Test Method Salt Spray Test


11. GB/T2423.17-2008 Salt Spray Test Method


GB-T10587-2006 Technical Conditions for Salt Spray Test Chamber


13. CNS 8886-2002 Determination of Salt Spray Corrosion Degree


14. CNS 4158 Salt water spray test method for surface treatment


Heating rate laboratory temperature RT →+65 ℃ ≤ 80 min


Pressure bucket temperature RT →+70 ℃ ≤ 90 min



Recommended products

久久精品A亚洲国产V高清不卡,真人性囗交69视频,护士扒下内裤让我爽一夜,А√天堂资源在线

              成年人免费在线视频| 337p欧洲亚洲日本大胆色噜噜| 米奇777四色精品人人爽| 91熟妇搡bbbb搡bbbb| 成人6969www免费视频| 十八毛片18女人18毛片免费观看 | 男女xxoo无遮挡动态啪啪| 丝袜av一区| 日韩精品一区二区三区在线观看| 国产精品一品| 99热在线免费观看| 熟女射精视频| 成年人视频黄色| 无套内谢少妇毛片A片小说| 欧美午夜理伦三级在线观看偷窥| 成人免费av| 国模吧一二三区| av大全免费在线观看| 91福利视频在线观看| jvid人体写真福利| 欧美性猛交xxxx黑人久久性| 99精品欧美一区二区三区美图| 91精品人妻一区二区三区四区| 亚洲日产精品一二三四区的优势| 中文字字幕在线中文无码| a人片中文字幕一区二品欧美一区二区三区 | 91欧美在线视频| 美女全黄网站| 亚洲丁香色| 成人免费视频免费观看| 99国产精品永久免费视频| 无套内射免费看| 国产xxxx99真实实拍| chinese极品人妻freehd| 成人H动漫精品一区二区无码| 亚洲伦理一区二区| 亚洲激精日韩激精欧美精品| 精品无码人妻一区二区三区| 久久久天堂国产精品女人| 三年片免费观看大全有哪些孕妇| 精品无码国产一区二区三区51安|